Magico - A Series-A5

Magico - A Series

Magico A1

Magico A3

Magico ACC

Magico Asub

In 2014 the introduction of the limited edition M-Project provided a glimpse of the cutting edge designs and advanced technologies that were being developed at Magico. Over the past two years intense research has been dedicated to exploring new methodologies and materials which are now incorporated in the Magico M3.A new carbon fiber side panel design, an all-graphene midrange and bass driver design, and the phenomenal 28mm diamond coated beryllium tweeter, previously found only in the M-Project, all come together in what is the most sophisticated loudspeaker we have ever created.An internal three-axis matrix framework in the M3 contributes to an extremely rigid enclosure and eliminates unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics.The M3 midrange driver operates in a purpose built sub-enclosure made of a proprietary polymer that enhances midrange control and articulation. This sub-enclosure concept was first used in the S3 and is now applied to our more recent 3-way speaker designs.The M3 incorporates the Diamond coated Beryllium diaphragm tweeter (28-mm) used in the MPro. The optimized geometry and the Diamond coating on the Beryllium aligns the acoustical properties closer to perfection without adding extra weight of a full Diamond dome, this revolutionary tweeter design offers a near perfect weight to stiffness ratio that is unmatched in the industry. The new tweeter provides extra-long excursion movement and uses a neodymium based motor system that is customized to match the sensitivity and power handling capabilities of the M3 while maintaining ultra-wide dispersion characteristics and ultra-low distortion measurements.Magico is the world’s first manufacturer to utilize graphene in the development of a radically new and advanced loudspeaker cone design. Graphene has many extraordinary properties and is approximately 100 times stronger than the strongest steel. The newly designed Magico six-inch midrange and seven-inch bass driver cones found in the M3 are both manufactured using Multi-Wall carbon XG Nanographene and an ultra-stiff proprietary new carbon weave which is 20% lighter and 300% stiffer than previous cone material we used in Magico loudspeaker offerings.Three seven-inch M3 bass drivers are vertically aligned to achieve ideal room integration and reproduce the lowest registers of bass frequency with speed and accuracy. The M3 bass drivers are optimized for minimal music related distortions in the frequency and time domain using the latest state-of-the-art FEA simulation.A contributing element to the stunning overall sound performance of the M3 is the application of the MPOD. The MPOD is based on the scientific principles of Constrained Layer Damping (CLD) which are well documented and in our opinion, the most effective way to channel unwanted vibrations away from a component and its platform.Operating under massive weight the MPOD is a noise channeling system that effectively dissipates resonance while maintaining ultimate coupling properties to the floor resulting in remarkable sonic results. M3’s ordered with the MPOD 3-Pt Stand come with a beautifully appointed case that includes six MPOD’s and a professional grade torque wrench that allows for periodic maintenance of the internal tension rods.Driver Complement:<ul><li>1 X 1” (2.8cm) Diamond Coated Beryllium Dome Tweeter</li><li>1 X 6” (12.24cm) Graphene Nano-Tec Midrange</li><li>3 X 7” (17.78cm) Graphene Nano-Tec Bass</li></ul>Sensitivity: 91dBImpedance: 4 OhmsFrequency Response: 24 Hz - 50 kHzRecommended Power: 20 - 500 wattsDimensions: 48"H x 19"D x 13WWeight: 320 lbs.

Magico M3 Floorstanding Loudspeaker with carbon fiber side panel design and all-graphene midrange and bass driver design

Magico M3 6" Black Floor Standing Speaker

The M6 is a floor standing, three-way, five-driver loudspeaker design that establishes a new pinnacle of engineering and design vision at Magico.Since the release of the M-Project in 2014, Alon Wolf and his engineering team have worked to expand upon the ground breaking designs that were first introduced in the critically acclaimed product which included the application of carbon side panels.The new M6 represents the culmination of such efforts and a major advance in loudspeaker design. The most compelling aspect is the six-sided, monocoque enclosure sculpted of ½” carbon fiber, leveraging the latest Aerospace materials and technologies. Similar to the external shell of an F-35 fighter jet, this method of construction increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.Four massive aluminum billets are meticulously machined to produce a continuously curved exterior with no angles. A thick-machined aluminum inner baffle supports the drivers, while ten aluminum tension rods extend front to back to further stiffen the enclosure and eliminate the possibility of hardware loosening overtime.The new M6 enclosure is completely sealed and, in its finished form, has nearly zero diffractions which allow sound waves propagated by the transducers to disperse naturally without obstruction. This creates a sound-field that replicates that of the recording space and allows the speaker to completely vanish in its environment.A new reverse horn-shaped sub-enclosure made of proprietary carbon fiber composite houses the midrange driver and provides an extremely stiff, yet ideally damped, chamber that disperses internal standing waves without the need for copious internal damping materials.A slight curvature in the machined front baffle enhances the seamless integration of all five drivers and provides an elegant appearance overall. The newly designed 3-point MPOD base provides a perfect coupling platform to the floor and supports the M6 as though it were floating in space.The M6 incorporates a 28mm diamond-coated beryllium diaphragm with optimized geometry, created using state-of-the-art Finite Element Analysis modeling tools which elevates the M6's high-frequency reproduction one step closer to perfection. This was achieved by skillfully leveraging beryllium's physical properties, making the tweeter closer to the theoretical ideal without gaining the extra weight normally associated with diamond's specific gravity. Combined with a new motor system and new acoustically improved back chamber, the M6 tweeter has the lowest distortion measurements of any high-frequency transducer.The M6 midrange driver (6-inch) features Magico’s superior Graphene-based cone material which is 30% lighter and 300% stiffer than that of its predecessors. This driver utilizes an underhung neodymium-based motor system featuring dual magnet structures to ensure a perfectly stabilized magnetic field of 1.7 Tesla in a 15mm air gap, culminating in a pure vented titanium voice coil. The midrange driver has +/-6mm of stabilized excursion capability at very high sensitivity, enabling 120dB / 1M of distortion-free playback performance.Deep, powerful, and accurate bass frequencies result from three newly designed 10.5-inch Magico bass drivers that are produced with advanced manufacturing techniques using a new multi-wall carbon, Nanographene cone. Colossal engineering efforts were applied to minimize eddy currents in the iron components of the underhung motor system by using precision machined parts and incorporating a massive neodymium SD magnet system. These breakthrough design features yield a 90% saturated iron effect (industry standard is less than 20%) and enable the 5-inch pure titanium voice coil to move with 1-inch of linear excursion without any electromagnetic obstruction and producing clean, undistorted sound pressure levels up to 120dB @ 50Hz/1-meter.All five drivers in the M6 are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that utilizes state-of-the-art components from Mundorf of Germany. The dividing network maximizes frequency bandwidth while preserving phase linearity and minimizing intermodulation distortion. Individual driver performance, and the loudspeaker in its final form, are tested and optimized for acoustical, mechanical, electromagnetic, and thermal behaviors using the latest state-of-the-art Finite Element Analysis simulation testing equipment.Driver Complement:<ul><li>1 x 1.10" (2.794cm) Diamond-Coated Beryllium Dome Tweeter</li><li>1 x 6” (15.24cm) XG Nanographene Cone Midrange</li><li>3 x 10.5” (26.67cm) XG Nanographene Cone Bass</li></ul>Sensitivity: 91dBImpedance: 4 OhmsFrequency Response: 22 Hz - 50 kHzMinimum Recommended Power: 30 wattsDimensions: 57”H x 26”D x 20/15"WWeight: 390 lbs

Magico M6 Floorstanding Loudspeaker with carbon fiber side panel design and all-graphene midrange and bass driver design

Magico M6 Floorstanding Loudspeaker

Magico&rsquo;s noise channeling support system for medium to heavy loads. Many have already experienced the significant sonic improvements with the Magico QPOD placed under light-to medium-weight components. Magico engineers have now succeeded in designing the larger MPOD with these same philosophies for ideal noise reduction and floor coupling characteristics under greater loads.The design of the MPOD is based on the scientific principles of Constrained Layer Damping (CLD), an extremely effective way to channel unwanted vibrations away from a component and its platform. The robust-yet-elegant MPOD is comprised of multiple machined aircraft-aluminum and tungsten steel parts that, when assembled, form a vertical stack. A solid pure-copper substrate center section is sandwiched by a top and bottom layer of ISODAMP a thermoplastic material that, when compressed against the copper substrate, facilitates the constrained layer damping function and dissipates unwanted energy virtually immediately.Prior to installation the top and bottom halves of the MPOD are held apart by a center spindle and pull-pin. Once the MPOD is installed the removal of the pull-pin engages the CLD properties of the MPOD. Once the pin is removed, no hardware is connected between the top and bottom part of the MPOD, effectively &ldquo;floating&rdquo; the component placed on it. The results: increased resolution, more focused imaging and improved soundstage.The threaded coupling stud on the MPOD is designed as an upgrade to replace the existing footer on the Magico M3, Q7, Q7MkII, M-Project, and S7, as well as being supplied as the standard foot for our M6. The audible benefits of the MPOD will also be realized underneath heavier components such as amplifiers, without using the threaded coupling stud.

Magico MPOD Speaker Feet-3 Pack with Constrained Layer Damping principles and a solid pure-copper substrate center section

Magico MPOD Speaker Feet-3 Pack

Magico MPOD Speaker Feet-4 Pack with Constrained Layer Damping principles and a solid pure-copper substrate center section

Magico MPOD Speaker Feet-4 Pack

Magico MPOD Speaker Feet-8 Pack with Constrained Layer Damping principles and a solid pure-copper substrate center section

Magico MPOD Speaker Feet-8 Pack

Magico M2 - High Performance Loudspeaker System

 Magico M Series -M2

 Magico M Series 

Magico's materials science research in the properties and applications of carbon allows the M2 to feature a new monocoque enclosure. Similar in construction technique introduced in the M6, it is formed using multiple layers of carbon fiber adding up to a 3/8” thickness. Similar to the external shell of an F-35 fighter jet, this enclosure construction compared to machined or extruded aluminum parts increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

An internal three-axis matrix framework along with three tension rods running front to back internally contribute to an extremely rigid enclosure which eliminates unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics. All four drivers in the M2 are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology (24 dB Linkwitz-Riley) that includes state-of-the-art components from Mundorf of Germany.  A purpose built sub-enclosure formed of a proprietary polymer material houses the midrange driver to optimize the control and articulation of mid-band frequencies and provides protection from the massive back wave pressure of the bass drivers. Midrange sub-enclosures using different shapes, sizes and materials have been implemented throughout the history of Magico 3-way loudspeaker designs.

The M2 incorporates the Diamond coated Beryllium diaphragm tweeter (28-mm) used in the M3 and M6. The optimized geometry and the Diamond coating on the Beryllium aligns the acoustical properties closer to perfection without adding extra weight of a full Diamond dome, this revolutionary tweeter design offers a near perfect weight to stiffness ratio that is unmatched in the industry. The new tweeter provides extra-long excursion movement and uses a neodymium based motor system that is customized to match the sensitivity and power handling capabilities of the M2 while maintaining ultra-wide dispersion characteristics and ultra-low distortion measurements.  Magico is the world’s first manufacturer to utilize graphene in the development of a radically new and advanced loudspeaker cone design. Graphene has many extraordinary properties and is approximately 100 times stronger than the strongest steel. The newly designed Magico six-inch midrange and seven-inch bass driver cones found in the M2 are both manufactured using Multi-Wall carbon XG Nanographene and an ultra-stiff proprietary new carbon weave which is 20% lighter and 300% stiffer than previous cone material we used in Magico loudspeaker offerings.  Two seven-inch M2 bass drivers are vertically aligned to achieve ideal room integration and reproduce the lowest registers of bass frequency with speed and accuracy. The M2 bass drivers are optimized for minimal music related distortions in the frequency and time domain using the latest state-of-the-art FEA simulation.

Driver Complement: 1 X 1” (2.8cm) Diamond Coated Beryllium Dome Tweeter 1 X 6” (12.24cm) Graphene Nano-Tec Midrange 2 X 7” (17.78cm) Graphene Nano-Tec Bass  Sensitivity: 88dB  Impedance: 4 Ohms  Recommended Power: Minimum 50W rms  Dimensions: 45"H x 17.5"D x 18W (114.3cm x 44.45cm x 20.32cm) (including MPod 3-Pt Stand)  Weight: 165 lbs. (75 kg)

Throughout the development process of the Q platform numerous advances in the area of resonance management were made.Originally developed for internal R&D, Magico is introducing the QPods to maximize front-end system performance. The pods themselves are CNC-turned and milled from hardened stainless-steel, oxygen-free copper, and hard black-anodized aircraft-grade aluminum. These materials create the constraining layers for the damping material that is alternately clamped between to create a single traverse dissipating unit, which we call the QPod.Vibrational wave propagation through the floor, stands, and the equipment itself is converted into heat energy through the side-to-side movement (known as &ldquo;shear deformation&rdquo;) within each layer of the pod.By adding a multi-leveled constraining layer mechanism to equipment standoffs, electrical and mechanical vibration-induced artifacts are acutely reduced, ultimately resulting in marked improvements to signal fidelity.

Magico QPod Speaker Feet-3 Pack with CNC-turned design and milled from hardened stainless-steel

Magico QPod Speaker Feet-3 Pack

Magico QPod Speaker Feet-4 Pack with CNC-turned design and milled from hardened stainless-steel

Magico QPod Speaker Feet-4 Pack

Throughout the development process of the Q platform numerous advances in the area of resonance management were made.

Originally developed for internal R&D, Magico is introducing the QPods to maximize front-end system performance. The pods themselves are CNC-turned and milled from hardened stainless-steel, oxygen-free copper, and hard black-anodized aircraft-grade aluminum. These materials create the constraining layers for the damping material that is alternately clamped between to create a single traverse dissipating unit, which we call the QPod.

Vibrational wave propagation through the floor, stands, and the equipment itself is converted into heat energy through the side-to-side movement (known as “shear deformation”) within each layer of the pod.

By adding a multi-leveled constraining layer mechanism to equipment standoffs, electrical and mechanical vibration-induced artifacts are acutely reduced, ultimately resulting in marked improvements to signal fidelity.

Built around the renowned Q platform, the QSubs set new standards in low frequency sound reproduction. Capable of delivering 136 dB sound pressure level with less than 1% total harmonic distortion at 20Hz[i], the message is simple: if you think you have heard low frequencies before, think again.According to Magico CEO and chief designer Alon Wolf, “Bass has never been heard like this before. For the first time, low frequencies can be produced with unprecedented clarity.”The QSub-18 weighs over 550 lbs. and has massive power handling capability of 8,000W, delivering thundering low frequencies that are fast, pure, and devastatingly accurate.As these images illustrate, most conventional subwoofers fail to address the biggest problem in reproducing low frequencies: enclosure warping.Due to the enormous sound pressure buildup, the pliable walls of typical enclosures absorb a tremendous portion of the energy generated by the drivers, leading to distortion and massive group delay (smearing). The QSub can reach an internal sound pressure level of up to 175dB - the equivalent of a commercial jet at takeoff - with less than 1% displacement of common enclosures.Driver Complement: 2 x 15" (38.1cm) Bass DriversSensitivity: 90dBImpedance: 4 OhmsFrequency Response:<ul><li>15 Hz - 150 Hz</li><li>Onboard digitally-controlled active crossover</li><li>2000W Amplifier</li></ul>Weight: 350 lbs.&nbsp;

Built around the renowned Q platform, the QSubs set new standards in low frequency sound reproduction. Capable of delivering 136 dB sound pressure level with less than 1% total harmonic distortion at 20Hz[i], the message is simple: if you think you have h

Magico Q Series 15" Black Subwoofer

Built around the renowned Q platform, the QSubs set new standards in low frequency sound reproduction. Capable of delivering 136 dB sound pressure level with less than 1% total harmonic distortion at 20Hz[i], the message is simple: if you think you have heard low frequencies before, think again.

Built around the renowned Q platform, the QSubs set new standards in low frequency sound reproduction. Capable of delivering 136 dB sound pressure level with less than 1% total harmonic distortion at 20Hz[i], the message is simple: if you think you have heard low frequencies before, think again.According to Magico CEO and chief designer Alon Wolf, “Bass has never been heard like this before. For the first time, low frequencies can be produced with unprecedented clarity.”The QSub-18 weighs over 550 lbs. and has massive power handling capability of 8,000W, delivering thundering low frequencies that are fast, pure, and devastatingly accurate.As these images illustrate, most conventional subwoofers fail to address the biggest problem in reproducing low frequencies: enclosure warping.Due to the enormous sound pressure buildup, the pliable walls of typical enclosures absorb a tremendous portion of the energy generated by the drivers, leading to distortion and massive group delay (smearing). The QSub can reach an internal sound pressure level of up to 175dB - the equivalent of a commercial jet at takeoff - with less than 1% displacement of common enclosures.Driver Complement: 2 x 18" (45.72cm) Bass DriversSensitivity: 90dBImpedance: 4 OhmsFrequency Response:<ul><li>15 Hz - 150 Hz</li><li>Onboard digitally-controlled active crossover</li><li>4000W (6000W for 230V) Amplifier</li></ul>Weight: 570 lbs.

Magico Q Series 18" Black Subwoofer

<div> <div> <div> Constructed of 500 lbs of aluminum, copper, and damping compound, the MRack is a byproduct of Magico&rsquo;s R&D invested into their Q series of loudspeakers.</div> <div> &nbsp;</div> <div> The MRack absorbs and dissipates energy with the same constrained-layer damping mechanism employed in the Magico QPod equipment.</div> </div> <div> &nbsp;</div></div> &nbsp;

Magico Q Series Loud Speaker Rack Accessories with aluminum and copper

Magico Q Series Loud Speaker Rack Accessories

At first glance the S1 Mk II may appear similar to its predecessor. However, it is entirely redesigned, and incorporates distilled elements of our most recent and ground breaking engineering accomplishments. The design platform of the S1 Mk II features core technologies that are unique to Magico &ndash;an all aluminum enclosure, and proprietary driver design that outperforms any other driver available today.The monocoque enclosure of the S1 Mk II is formed from a single piece of extruded aluminum that is 3/8" thick and 12" in diameter. The slender enclosure is supported internally by a new innovative bracing technique along with advanced damping materials and glues that minimize resonance and maximize structural rigidity and stability. A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves.Detailed and extended high frequencies are provided by the newly designed 1-inch Diamond coated Beryllium diaphragm tweeter - first introduced in the S7 - that offers matching sensitivity, wide dispersion and high power handling. A robust motor system and long throw voice coil enables lower distortion and cutoff frequencies never achieved before.Captivating mid-bass performance is provided by a newly designed 7-inch mid bass driver that incorporates Mutli-Wall carbon nanotube and Nanographene which combined is 20% lighter and 300% stiffer than the previous cone material used in the original S1. A new underhung neodymium base motor system substantially increases the S1 Mk2 power handling.A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. Newly designed 4-point outrigger assembly supports the S1 Mk II enclosure and optimizes overall performance. The S1 Mk II is available a new M-Cast finish and the luxurious M-Coat painted finish.Driver Complement:<ul><li>1 x 1" (2.54cm) Diamond Coated Beryllium Dome</li><li>1 x 7" (17.78cm) Graphene Nano-Tec Cone </li></ul>Sensitivity: 86dBImpedance: 4 OhmsFrequency Response: 32 Hz - 50 kHzRecommended Power: 50 wattsDimensions: 43"H x 8.5"D x 9.75"WWeight: 120 lbs.

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Black with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Black

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Blue with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Blue

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Bonze with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Bonze

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Pewter with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Pewter

At first glance the S1 Mk II may appear similar to its predecessor. However, it is entirely redesigned, and incorporates distilled elements of our most recent and ground breaking engineering accomplishments. The design platform of the S1 Mk II features core technologies that are unique to Magico &ndash;an all aluminum enclosure, and proprietary driver design that outperforms any other driver available today.The monocoque enclosure of the S1 Mk II is formed from a single piece of extruded aluminum that is 3/8" thick and 12" in diameter. The slender enclosure is supported internally by a new innovative bracing technique along with advanced damping materials and glues that minimize resonance and maximize structural rigidity and stability. A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves.Detailed and extended high frequencies are provided by the newly designed 1-inch Diamond coated Beryllium diaphragm tweeter - first introduced in the S7 - that offers matching sensitivity, wide dispersion and high power handling. A robust motor system and long throw voice coil enables lower distortion and cutoff frequencies never achieved before.Captivating mid-bass performance is provided by a newly designed 7-inch mid bass driver that incorporates Mutli-Wall carbon nanotube and Nanographene which combined is 20% lighter and 300% stiffer than the previous cone material used in the original S1. A new underhung neodymium base motor system substantially increases the S1 Mk2 power handling.A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. Newly designed 4-point outrigger assembly supports the S1 Mk II enclosure and optimizes overall performance. The S1 Mk II is available a new M-Cast finish and the luxurious M-Coat painted finish.Driver Complement: <ul><li>1 x 1" (2.54cm) Diamond Coated Beryllium Dome</li><li>1 x 7" (17.78cm) Graphene Nano-Tec Cone </li></ul>Sensitivity: 86dBImpedance: 4 OhmsFrequency Response: 32 Hz - 50 kHzRecommended Power: 50 wattsDimensions: 43"H x 8.5"D x 9.75"WWeight: 120 lbs.

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Rose with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Rose

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Silver with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Cast Silver

Magico S1 Mk II Floor Standing Loudspeaker-M-Coat Black with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Coat Black

Magico S1 Mk II Floor Standing Loudspeaker-M-Coat Blue with 1" Diamond Coated Beryllium Dome and 7" Graphene Nano-Tec Cone

Magico S1 Mk II Floor Standing Loudspeaker-M-Coat Blue

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

<avb-header-after>  <avb-designer-block data-id="27" class="avb-grid avb-typography dsg-block-27-header-after"> <div class="avb-grid__column avb-grid__column--small-12 dsg-block-27__no-padding dsg-block-27-header-after__headline"> <avb-link class="avb-wrapper dsg-block-27-header-after__content" data-href="https://www.speakershop.com/virtual-tour"> Click to view our 3D Virtual Tour and please Shop On In! &raquo; </avb-link> </div> </avb-designer-block> </avb-header-after>  <style> @import url('https://fonts.googleapis.com/css?family=Montserrat:300,500,700&display=swap'); /* ==================== Header-after (block-27-header-after) ==================== */ .dsg-block-27__no-padding { padding: 0; } .dsg-block-27-header-after__headline { padding: 0.5rem; text-align: center; color: white; font-weight: 100; background-color: #550d25; margin-bottom: 0; color: white; font-weight: 100; font-size: 16px; margin-top: .1rem; letter-spacing: 1px; font-family: 'Montserrat', sans-serif; } .dsg-block-mobile { display: block; } .dsg-block-display { display: none; } .dsg-block-27-underline { text-decoration: underline; } .dsg-block-27-header-after__content, .dsg-block-27-header-after__content:visited, .dsg-block-27-header-after__content:focus { color: white; font-weight: 100; } .dsg-block-27-header-after__content:hover { color: white; } .dsg-block-27-header-after--bold { font-weight: 700; } .dsg-block-27-header-after--bold:hover { color: #aeaeae; } @media screen and (min-width: 600px) { .dsg-block-mobile { display: none; } .dsg-block-display { display: inline; } .dsg-block-27-header-after__content, .dsg-block-27-header-after__content:visited, .dsg-block-27-header-after__content:focus { display: inline; } } @media screen and (min-width: 960px) {} @media screen and (min-width: 1280px) {} @media screen and (min-width: 1600px) {} </style>

Default Header After Global Promotions

Magico