For screen reader problems with this website, please call716-837-15577 1 6 8 3 7 1 5 5 7Standard carrier rates apply to texts.

Click to view our 3D Virtual Tour and please Shop On In! »
Speaker Shop Inc.

Speaker Shop Inc.

716-837-1557

Esoteric Class A Integrated Amplifier

Model #: F-03A

$14,000.00

At a Glance

Setting out to create one of the most desirable integrated amplifiers available, Esoteric brought together a fully balanced preamplifier and a Class-A power amplifier-both directly derived from its well-respected Grandioso line-to create a new reference for integrated amplifiers that gives full expression to the smooth, full-bodied tones and delicately shaded textures of your favorite music.

WarningProposition 65 Warning for California Residents
Esoteric Class A Integrated Amplifier

Gain

Preamplifier24.5dB (when VOLUME at maximum)
Power Amplifier29dB

Tone Controls

BASS Tone Curve±12dB (63Hz)
MIDDLE Tone Curve±12dB (630Hz)
TREBLE Tone Curve±12dB (14kHz)

General

Power supply / Power consumptionAC 230V 50Hz / 290W (no signal: 290W); AC 120V 60Hz / 290W (no signal: 215W); AC 220V 60Hz
External Dimensions (W x H x D)445 x 191 x 468mm (17 5/8″ x 7 5/8″ x 18 1/2″) (including protrusions)
Weight32kg (70 5/8 lb)

Input Impedance

XLR, RCA10kΩ
PHONO (MM)47kΩ
PHONO (MC)100Ω
EXT. PRE IN47kΩ

Output Impedance

XLR, RCA100Ω
XLR, RCA Input75dB
PHONO (MM) Input75dB
PHONO (MC) Input75dB

General Specs

Depth (in.)18.50
Height (in.)7.63
Width (in.)17.63
Product Weight (lbs.)70.63
ColorSilver

Included Accessories

Remote Control Unit (RC-1301)1
Batteries (AAA)2
Power Cord1
Felt Pads4
Owner's Manual1
Warranty Card1

Speaker Output

Rated Output30W + 30W (8Ω); 60W + 60W (4Ω)
Total Harmonic Distortion (1kHz, 8Ω)0.006% (30W)
Frequency Response (+0/-3.0 dB at 1W output)10Hz – 100 kHz(+0/−3.0 dB at 1W output)
S/N Ratio (IHF-A)104dB
Damping Factor370
Minimum Compatible Impedance
Speaker Output Connectors2 pairs (L/R) (screw type)

Esoteric Class A Integrated Amplifier

Model #: F-03A
231267
Esoteric

See Price in Cart

$14,000.00

At a Glance

Setting out to create one of the most desirable integrated amplifiers available, Esoteric brought together a fully balanced preamplifier and a Class-A power amplifier-both directly derived from its well-respected Grandioso line-to create a new reference for integrated amplifiers that gives full expression to the smooth, full-bodied tones and delicately shaded textures of your favorite music.

Get to know this product.

Featuring distinctive dual monaural construction that extends through all stages, from preamplifier inputs through to the final stage of its power amplifier output, the F-03A Integrated Amplifier brings out the full audio potential of Esoteric's highly regarded K and N Series of digital players.

Output stereo - 30 W + 30 W @ 8Ω

Pure class A amplifier

Dual mono architecture

QVCS - Quad Volume Control System

MM / MC phono input

3 Band Tone Control

F-Series Philosophy: Basic and Complete

Representing a new generation of integrated amplifiers, Esoteric’s new F Series has been thoroughly invested with proven results gained in the development of our flagship Grandioso line of separate amplifiers. With the goal of capturing all the inherent warmth and texture of music, not only were the outstanding expressive powers of the Grandioso line pursued, the utmost limits of audio performance were also concentrated into an integrated configuration that offers excellent usability combined with an attractiveness that more than compensates for the limitations of their size. Basic and Complete. With sights set on creating a unique presence in the category, the Esoteric F Series is born.

A Fully Balanced Preamplifier

One result of the lavish attention given to the development of the F Series is the preamplifier's fully balanced configuration, which derives from our highly esteemed C Series preamplifier models. Impervious to noise, it delivers pure and powerful signal amplification at ultra-low impedance.

Dual Monaural by Design

The one design feature of these amplifiers that most clearly reflects Grandioso thinking is their dual monaural configuration, which maintains complete left and right channel independence through all stages, from preamplifier to the power amplifier's final stage. As Esoteric integrated amplifiers, the major investments made in circuit construction expertise and materials developed over the years yield excellent channel separation and a measure of sound quality that transcends the class.

Esoteric-QVCS

Playing a significant role in the F Series' balanced dual monaural configuration is the proprietary Quad Volume Control System (QVCS), which incorporates a total of four precision switched resistor ladder networks operating in unison to electronically and independently control the left and right channels and their positive and negative phases. This system helps maintain superb audio clarity, excellent channel separation and highly accurate phase characteristics. Further, by eliminating all volume control wiring on the audio board, the resulting shorter signal path minimizes deterioration of sound quality while realizing exceptionally low distortion.

Ultra-Low-Noise Logic Control

As a countermeasure against noise, all control lines have been electronically separated from the main body of the preamplifier with the use of isolator elements integrated into the front panel.

High-Precision Ball Bearing Control Knobs

Employing the same high-precision bearing mechanisms used in our Grandioso components, the F Series' volume control knobs and selector switches provide exceptionally smooth operation with an analog feel free of any mechanical play. Sparing no cost, all panel knobs are also custom-machined from solid aluminum.

Dual Mono Phonostage Preamp

The dual mono phonostage preamp (MM/MC) features independent left and right channel power sources and independent circuits.

High-Quality Headphone Amplifier

The powerful headphone amp provides abundant output to effectively drive even difficult to power high-end high-impedance headphones.

3-Band Tone Control (Treble/Middle/Bass)

Commitment to achieving all the quality associated with high-end components results in a balanced dual monaural configuration consisting of four circuits (L/R, -/+) for each band. This system enables users to adjust tone settings free of any concerns about sound quality deterioration. Shifting the variable band more than usual toward the high and low frequency ranges (14kHz/63Hz) permits fine adjustment of bass and treble without adversely affecting the original source signal. Fully electronic control also permits fine adjustment of up to ±12dB in 0.5dB steps. The middle band can also be utilized as a loudness preset when set to the minus side and used in conjunction with the Tone Bypass switch.

Power Amplifier Input Stage Features Balanced Configuration

The power amplification section's front stage is balanced in line with the thinking behind our S Series separate amplifiers. Its low impedance and clean amplification further enhance the dynamic range.

Large-Capacity Custom Power Transformer - The Nucleus of the Finest Power Amplifiers

The power supplies of the F Series feature large-core 940VA custom EI power transformers and 40,000µF block capacitors for each channel in a dual monaural configuration. Large-gauge cable is used in all connections to help minimize impedance. As in our separate power amplifiers, this outstanding power section achieves a theoretically linear power output ranging from 30W at an 8Ω load to 60W at 4Ω for faithful reproduction of every musical dynamic.

Low Impedance for Enhanced Drive Capability

Utilizing eight 1mm-thick bus bars formed of high-purity OFC, the speaker output section employs MOSFET switching with no mechanical contacts. Coils have also been eliminated from the output stage to minimize impedance and enhance drive capability.

Specifications

General Specs

Depth (in.)18.50
Height (in.)7.63
Width (in.)17.63
Product Weight (lbs.)70.63
ColorSilver

Speaker Output

Rated Output30W + 30W (8Ω); 60W + 60W (4Ω)
Total Harmonic Distortion (1kHz, 8Ω)0.006% (30W)
Frequency Response (+0/-3.0 dB at 1W output)10Hz – 100 kHz(+0/−3.0 dB at 1W output)
S/N Ratio (IHF-A)104dB
Damping Factor370
Minimum Compatible Impedance
Speaker Output Connectors2 pairs (L/R) (screw type)

Input Impedance

XLR, RCA10kΩ
PHONO (MM)47kΩ
PHONO (MC)100Ω
EXT. PRE IN47kΩ

Output Impedance

XLR, RCA100Ω
XLR, RCA Input75dB
PHONO (MM) Input75dB
PHONO (MC) Input75dB

Gain

Preamplifier24.5dB (when VOLUME at maximum)
Power Amplifier29dB

Tone Controls

BASS Tone Curve±12dB (63Hz)
MIDDLE Tone Curve±12dB (630Hz)
TREBLE Tone Curve±12dB (14kHz)

General

Power supply / Power consumptionAC 230V 50Hz / 290W (no signal: 290W); AC 120V 60Hz / 290W (no signal: 215W); AC 220V 60Hz
External Dimensions (W x H x D)445 x 191 x 468mm (17 5/8″ x 7 5/8″ x 18 1/2″) (including protrusions)
Weight32kg (70 5/8 lb)

Included Accessories

Remote Control Unit (RC-1301)1
Batteries (AAA)2
Power Cord1
Felt Pads4
Owner's Manual1
Warranty Card1
WarningProposition 65 Warning for California Residents