For screen reader problems with this website, please call716-837-15577 1 6 8 3 7 1 5 5 7Standard carrier rates apply to texts.

Click to view our 3D Virtual Tour and please Shop On In! »

Monitor Audio CW8 Custom Subwoofer-CW8B

Model #: CW8B
253221
Monitor Audio
At a Glance

The new CW8 places all the power in the hands of installer and client. Engineered for control in operation, bass quality and concealment in-room, the compact CW8 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.

Available in Store Only
$990.00Save
$990.00

Get to know this product.

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 25.5 cm dimensions incorporate no fewer than three robust, similarly sized 8" C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).

Technology

  • Ultra-compact ‘cube’ shape designs
  • Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box
  • High excursion woofers featuring signature C-CAM cone technology
  • High-power Class-D amplifier delivering 400 watts
  • DSP processing –all functions performed in the digital domain for precise control
  • RS-232 for integration with system controllers
  • SubConnect’ PC Applet for full feature adjustment, installer set-up and firmware update using USB
  • LFE Balanced XLR and unbalanced RCA Inputs
  • Stereo RCA line level inputs
  • Phase switch (0-180 degrees)
  • 12 V trigger and auto signal sensing with timer control
  • 4 x pre-set equalisation optimised for music, movie, flat and impact with customisation through ‘SubConnect’ Applet
  • Robust metal mesh grille on front woofer
  • Rigid MDF cabinet construction with durable vinyl finish
  • This product is now available to use with home theatre design software, The CEDIA Designer.
Specifications

General

System FormatActive sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
Lower Frequency Limit35 Hz (-6 dB)
Amplifier Output350 W RMS @ < 1% THD+N
Maximum SPL105.8 dBA
Amplifier ClassificationClass D amplifier with Switch mode power supply (SMPSU)
InputsStereo RCA LFE (RCA) LFE Balanced (XLR)
EQFlat/ Music/ Movie/ Impact
Phase Control0 & 180 degrees
Auto SensingLFE Input <2mV Auto wireless audio input signal detection
Auto StandbyAfter approximately 15 minutes if no signal sensed Wireless audio source turned off
Drive Unit Complement1 x 8" (200 mm) C-CAM long throw driver, 2 x 8" (200 mm) ABR
Input Impedance> 20 ohms
Mains Input Voltage110 - 120 Vac / 220 - 240 Vac 50/60 Hz (Manual Switch selection)
Dimensions (Including Feet (H x W x D))270 x 260 x 276 mm (10.63 x 10.25 x 10.88")
Trigger Input5 - 12 V via 3.5 mm mono mini-jack socket
Power ConsumptionStandby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
Weight (unpacked)9.52 kg (21 lb)

Misc. Specs

Product Weight21
Depth (in.)10.88
Width (in.)10.25
Height (in.)10.63
Woofer Size8"
Firing DirectionDown
Manufacturer Warranty5 Year
Speaker Size8
Subwoofer Size8
WarningProposition 65 Warning for California Residents