For screen reader problems with this website, please call716-837-15577 1 6 8 3 7 1 5 5 7Standard carrier rates apply to texts.

Click to view our 3D Virtual Tour and please Shop On In! »
Parasound® ZoneMaster™ Universal 2 Channel Amplifier
Parasound® ZoneMaster™ Universal 2 Channel Amplifier 0
Parasound® ZoneMaster™ Universal 2 Channel Amplifier 1
Parasound® ZoneMaster™ Universal 2 Channel Amplifier 2

Parasound® ZoneMaster™ Universal 2 Channel Amplifier

Model #: ZoneMaster 2350
136661
Parasound
At a Glance
Visit Store For Details
$1,295.00Save $NaN
$1,295.00

Get to know this product.

  • 350 watts x 2 @ 8 O
  • 600 watts x 2 @ 4 O
  • Two pairs of speaker outputs with A/B buttons
  • 2 O stable for driving multiple speaker pairs
  • Lockout switch on rear panel to disable A/B buttons
  • High pass filter, switchable for 30Hz or 80Hz
  • Automatic on/off by 12V trigger w/ looping output
  • Automatic on/off by audio signal
  • Speaker level input enables integration with systems lacking preamp output jacks
  • Parasound designed class AB input stage w/ premium Class D power stage
  • Subwoofer mode for driving multiple in-wall subs without the need for an external crossover
  • Mono mode combines L and R for single speaker applications
  • Mono full range preamp output
  • Subwoofer 80Hz, 24dB/oct. low pass preamp output
  • Looping left and right output jacks
  • Left and right input level controls
  • Efficient, low heat design
  • Short circuit and overload protection
  • 0.5 watt standby power consumption meets EU and Energy Star requirements
  • 2U rack mounting hardware is included in box

Power Output: RMS, Both Channels Driven (20 Hz – 20 kHz)

  • 350 watts x 2 @ 8 O
  • 600 watts x 2 @ 4 O or 2 O

Minimum Speaker Impedance (Output A+B)

  • Stereo or Mono Mode: 2 O
  • Subwoofer Mode: 4 O
  • Note: Operation at these minimum impedances might require additional ventilation.

Frequency Response

  • 10 Hz – 70 kHz, +0/-3 dB
  • 20 Hz – 20 kHz, +0/-0.8 dB

Total Harmonic Distortion

  • < 0.05 % at typical listening levels
  • < 0.9 % at full power

Inter-channel Crosstalk

  • 70 dB at 20 kHz

Input Sensitivity

  • 2 Volts = Full output (350 Watts @ 8 O)
  • Total gain = 29 dB (Level controls set to Maximum)

S/N Ratio

  • > 100 dB, input shorted, unweighted
  • > 114 dB, input shorted, IHF A-weighted

High and Low Pass Crossovers

  • Sub Mode and Sub out jack: 80 Hz, 24 dB per octave
  • High Pass Filter: 30 Hz or 80 Hz, 12 dB per octave

DC Trigger Requirements

  • +9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements

  • 2 mV audio signal (8-15 minutes turn off delay)

AC Power Requirement

  • 1500 Watts maximum
  • 100 Watts typical (music playing, typical listening level)
  • 30 Watts idle (no music playing)
  • 0.5 Watts in standby
  • 110-240 VAC 50/60 Hz

Dimensions

  • Depth without cables: 14.5”
  • Height without feet: 3.5”
Specifications

Connections

Analog Audio(RCA) Input:1
Preamp Outputs:2
Analog Audio(RCA) Output:1

Default

Name/Title:Parasound® ZoneMaster™ Universal 2 Channel Amplifier
Description:Parasound® ZoneMaster™ Universal 2 Channel Amplifier with sub crossover and mono full range preamp output
Features:<ul><li>350 watts x 2 @ 8 &Omega;</li><li>600 watts x 2 @ 4 &Omega;</li><li>2 &Omega; stable for driving multiple speaker pairs</li><li>Two pairs of speaker outputs with A/B buttons</li><li>Lockout switch on rear panel to disable A/B buttons</li><li>High pass filter, switchable for 30Hz or 80Hz</li><li>Automatic on/off by 12V trigger w/ looping output</li><li>Automatic on/off by audio signal</li><li>Speaker level input enables integration with systems lacking preamp output jacks</li><li>Parasound designed class AB input stage w/ premium Class D power stage</li><li>Subwoofer mode for driving multiple in-wall subs without the need for an external crossover</li><li>Mono mode combines L and R for single speaker applications</li><li>Mono full range preamp output</li><li>Subwoofer 80Hz, 24dB/oct. low pass preamp output</li><li>Looping left and right output jacks</li><li>Left and right input level controls</li><li>Efficient, low heat design</li><li>Short circuit and overload protection</li><li>0.5 watt standby power consumption meets EU and Energy Star requirements</li><li>2U rack mounting hardware is included in box</li></ul><p><strong>Power Output</strong>: <strong>RMS, Both Channels Driven (20 Hz &ndash; 20 kHz)</strong></p><ul><li>350 watts x 2 @ 8 &Omega;</li><li>600 watts x 2 @ 4 &Omega; or 2 &Omega;</li></ul><p><strong>Minimum Speaker Impedance (Output A+B)</strong></p><ul><li>Stereo or Mono Mode: 2 &Omega;</li><li>Subwoofer Mode: 4 &Omega;</li><li>Note: Operation at these minimum impedances might require additional ventilation.</li></ul><p><strong>Frequency Response</strong></p><ul><li>10 Hz &ndash; 70 kHz, +0/-3 dB</li><li>20 Hz &ndash; 20 kHz, +0/-0.8 dB</li></ul><p><strong>Total Harmonic Distortion</strong></p><ul><li>&lt; 0.05 % at typical listening levels</li><li>&lt; 0.9 % at full power</li></ul><p><strong>Inter-channel Crosstalk</strong></p><ul><li>70 dB at 20 kHz</li></ul><p><strong>Input Sensitivity</strong></p><ul><li>2 Volts = Full output (350 Watts @ 8 &Omega;)</li><li>Total gain = 29 dB (Level controls set to Maximum)</li></ul><p><strong>S/N Ratio</strong></p><ul><li>&gt; 100 dB, input shorted, unweighted</li><li>&gt; 114 dB, input shorted, IHF A-weighted</li></ul><p><strong>High and Low Pass Crossovers</strong></p><ul><li>Sub Mode and Sub out jack: 80 Hz, 24 dB per octave</li><li>High Pass Filter: 30 Hz or 80 Hz, 12 dB per octave</li></ul><p><strong>DC Trigger Requirements</strong></p><ul><li>+9 Vdc to +12 Vdc, 5 mA</li></ul><p><strong>Audio Trigger Requirements</strong></p><ul><li>2 mV audio signal (8-15 minutes turn off delay)</li></ul><p><strong>AC Power Requirement</strong></p><ul><li>1500 Watts maximum</li><li>100 Watts typical (music playing, typical listening level)</li><li>30 Watts idle (no music playing)</li><li>0.5 Watts in standby</li><li>110-240 VAC 50/60 Hz</li></ul><p><strong>Dimensions</strong></p><ul><li>Depth without cables: 14.5&rdquo;</li><li><span style="line-height:107%;">Height without feet: 3.5&rdquo;</span></li></ul>

Dimensions

Width:17.25
Height:4.25
Shipping Weight:22.25
Weight:15

Other

Speaker A/B Switching:Yes

Specifications

Power On Consumption (watts):100
Power Off Consumption (watts):0.5
Channels:2
Watts RMS per Channel (4-ohms):600
Watts RMS per Channel (8-ohms):350

Misc. Specs

Depth (in.)14.5
Height (in.)4.25
Width (in.)17.25
Channels2
Analog Audio(RCA) Input1
Preamp Outputs2
Product Weight (lbs.)15
WarningProposition 65 Warning for California Residents